Summary :

1. Please follow this procedure to format a large drive greater than 32GB with a FAT32 file system using Seagate DiscWizard: Reformatting the drive will erase all data on the drive, so you should copy any data you want off the drive prior to formatting. Install and launch DiscWizard 1) From the DiscWizard home screen, select Tools then Add New Disk.
2. If you have an NTFS drive you can use macOS’ Disk Utility to reformat it to FAT32. This is simple to do and means the data on your drive/USB stick can be read and written on both Macs and PCs.

Want to format an external hard drive for Mac and Windows PC? Do you know how to do this work easily? This MiniTool article will show you specific methods to make external hard drive compatible with Mac and PC, which are easy and safe to complete.

Mac devices on the other hand run on either Mac OS Extended or APFS. If your drive is an APFS format or a Mac OS format you can format your drive easily but if it is a FAT32 format this may be a problem. If you have made the mistake of buying a flash drive they run on a FAT32 file format you don't have to discard it altogether. Performing FAT32 Format of SD Card on Mac. To ensure that your update will go smoothly, we recommend you to do a FAT32 format on your SD card before putting the update file inside. If your SD card has already been FAT32 formatted before, there is no need to do again. To do FAT32 format on a Mac, please follow these simple steps.

As we know, external hard drives are widely used to backup data or interchange files among different computers. Well, is there an external hard drive that could be shared between Mac and Windows PC? Of course, there is. Actually, most external hard disks could be compatible with Mac and PC as long as you format them correctly.

Why Need to Format External Hard Drive for Mac and PC

To put it simply, if you want to share external hard drive between Mac and PC, you need to format an external hard drive for Mac and PC.

Currently, hard drives for Windows PC are always formatted with NTFS, while hard disks for Mac are formatted with HFS+. However, when we connect a NTFS formatted disk to Mac, Mac OS X doesn't allow us to write files to the drive neither edit files, though it can read a NTFS drive. Similarly, Windows OS will ask us to format the HFS+ formatted drive when we connecting such a disk, let along edit files saved on HFS+ formatted hard disks unless we resort to third party programs.

But luckily, there are file systems well supported by both Mac and Windows PC, and they are FAT32 (it might be called MS-DOS on Mac) and exFAT. As long as we format the external hard drive to one of these 2 file systems, it can be shared between Mac and Windows.

Further Reading

Both FAT32 and exFAT have advantages and disadvantages.

FAT32: FAT32 works with all versions of Windows, Mac OS, Linux, game consoles, etc.

However, single files on a FAT32 drive can't be larger than 4GB. If your external drive saves files larger than 4GB or you plan to save larger files to this drive, converting to FAT32 is not recommended.

In addition, a FAT32 partition must be not more than 32GB if you create it in Windows Disk Management. Of course, there is free partition manager that can help create a FAT32 volume up to 2TB, which also functions correctly.

exFAT: exFAT has very large file size and partition size limits, which means it's a good idea to format your external hard drive to exFAT.

Nevertheless, a lot of users complained that exFAT is slow, and they highly suggest using FAT32 if you can avoid file size constraints.

Three Options for Accessing NTFS Drives on Mac

Paid Third-Party Drivers

Some paid third-party NTFS drivers for Mac can be used to access NTFS drives on Mac. They work well and they have better performance than the free solutions which will be mentioned in the following part. Paragon NTFS for Mac is such a driver.

Besides, you can also use the paid third-party file system converters to convert NTFS to FAT32 or exFAT which are compatible with both Mac and PC. MiniTool Partition Wizard is one representative.

Free Third-Party Drivers

FUSE for macOS is a free and open-source NTFS driver that can enable write support. But, this solution is slower relatively. And the automatically mounting NTFS partitions in read-write mode can be a security risk for your Mac computer.

Apple’s Experimental NTFS-Write Support

The Mac OS has an experimental support for writing to NTFS drives. Usually, it is disabled by default and needs some messing around in the Mac terminal to enable it.

It doesn’t work properly all the time and could lead to potential issues with your NTFS file system. For example, it had corrupted data before. Thus, we don’t suggest using this tool and we believe it is disabled by this reason.

Here, we recommend using the paid third-party tools since they are easy-to-use and can do good work for you.

Then, we will introduce these three options for you in the following content.

The Best Paid Third-Party Driver: Paragon NTFS for Mac

Paragon NTFS for Mac can write, edit, delete, copy, or move files on NTFS volumes from your Mac computer. It offers a 10-day free trial. If you want to use it all the time, you need to pay for it.

With it, you don’t have to fiddle with terminal commands to mount partitions manually. Additionally, it can mount partitions automatically and safely. More importantly, it can code with the potential corruption. If you purchase a Seagate drive, you can even get a free download of Paragon NTFS for Mac.

All in all, it does its works well and gives you good user’s experience.

The Best Free Third-Party Drivers: FUSE for macOS

FUSE for macOS is a free solution to access NTFS on Mac. But it is less secure.

If you want to make automatically mount NTFS partitions in read-write mode on Mac, you need to temporarily disable the System Integrity Protection and replace one of Apple’s built-in tools with a binary that is more vulnerable to attack. Thus, your Mac is in danger when using this driver.

However, you can use it to manually mount NTFS partitions in read-write mode if you never mind using the Terminal. This will be safer, but you need to do more work. You can go to google the steps and see how complex they are.

Apple’s Experimental NTFS-Writing Support: Don’t Do This, Seriously

Although we mentioned this method in our article, we still don’t recommend it because it is the least tested. It is just for educational purposes, and it is available on Mac OS 10.12 Sierra. Perhaps, it will be unstable forever.

How to Quickly Format External Hard Drive for Mac and PC without Losing Data

Another way to access NTFS drive on Mac is to convert the NTFS/HFS+ to FAT/exFAT. Then, the drive can be used on both Mac and PC.

There should be some important data on the drive. To keep it safe, you can choose this best NTFS/HFS+ to FAT/exFAT converter: MiniTool Partition Wizard.

How to Convert NTFS to FAT32 or exFAT Without Data Loss

To format hard drive for Mac and Windows without data loss, we suggest using MiniTool Partition Wizard and its 'Convert NTFS to FATS32' function. If you are a personal user, you can try its Professional Edition.

Step 1: Run MiniTool Partition Wizard

Download this software to your computer. Then, you can open the software and input the license key to the pop-out window to get its Professional Edition.

Step 2: Convert NTFS to FAT32 with This Software

After running the program successfully, we can see its main interface as follows:

Here, please select the NTFS partition of external hard drive and choose 'Convert NTFS to FAT' feature from the left action pane. If there is more than one NTFS partition, convert all of them one by one.

At last, click 'Apply' button to make the change executed.

When MiniTool Partition Wizard shows it applies the change successfully, the original NTFS will finally become a FAT32 partition.

By this way, you can easily format an external hard drive for Mac and PC without losing any data. Then, you can share external hard drive between Mac and PC

You Can Convert NTFS to exFAT in 3 Steps

Windows 10 Fat32 Format Tool

However, if you want to convert NTFS to exFAT to make external hard drive compatible with Mac and PC, 3 steps are required.

Step 1: Transfer Data out from External Hard Drive

You can choose to copy and paste those files to other external devices or internal hard disk of Windows, but it will cost much time. Instead, you can use MiniTool Partition Wizard Free Edition to create a copy for your external drive, which is faster.

If there is only one NTFS partition on external hard drive, refer to the tutorial Copy Partition to get instructions. However, if there is more than one NTFS partition, view Copy Disk to get specific operations.

Step 2: Create exFAT Partition with MiniTool Partition Wizard

The Free Edition of this software also enables you to do this job.

Firstly, you need to delete the partition by using this software. Just open the software to enter its main interface. Then, choose the target partition and click 'Delete Partition' from the left action pane. After that, you should click 'Apply' to keep this change.

Secondly, the target partition will become unallocated. Here, you need to choose that partition and click on 'Create Partition' from the left action pane.

Thirdly, you will see a pop-out window. Here, you can choose 'exFAT' from the 'File System' setting option. At the same time, you can also set some other parameters for this partition, including 'Partition Label', 'Drive Letter', 'Size And Location'. After that, please click on 'OK'.

Fourthly, you will go back to the main interface. Then, please click on 'Apply' to save these changes.

Finally, an exFAT partition will be created on your external hard disk so that it could be shared between Mac and Windows PC

Step 3: Transfer Data back to External Drive

If you want to share files that you have backed up between Mac and PC, now please transfer these files back to external hard drive.

How to Convert HFS+ to FAT32 or exFAT without Losing Data

Besides, you can format an external hard drive for Mac and Windows by converting HFS+ to FAT32 or exFAT without losing any data.

Step 1: Backup Data in HFS+ Partition on Mac

Just transfer all useful files out from the external hard drive to other devices on Mac. Of course, if you have a backup already, ignore this step.

Step 2: Create a FAT32 or exFAT Partition on Windows PC

Some people may ask why create such partitions on Windows rather than Mac. That is because there are cases reporting FAT32 (MS-DOS) or exFAT partitions created on Mac did not work well on Windows.

Please skip to Solution 1: Format External Hard Drive to FAT32 to get steps to create a FAT32 partitions or go back to Step 2: Create exFAT Partition with MiniTool Partition Wizard to get operations to create an exFAT partition.

How to Make an Empty External Drive Compatible with Mac and PC

If there is no file saved on your external hard drive, how to make external hard drive compatible with Mac and PC?

It's very easy to share it between Mac and PC and you also need a Windows computer, a Mac machine, and the free partition manager MiniTool Partition Wizard Free Edition.

There are 3 solutions for this case, so please choose the one you like most to format external hard drive Windows 10/8/7.

Solution 1: Format External Hard Drive Windows 10/8/7 to FAT32

Since users are unable to create a FAT32 partition larger than 32GB in Windows Disk Management, they need to use MiniTool Partition Wizard Free.

Please download and install this program on your Windows computer to format an external hard drive for Mac and PC.

Firstly, open the software to enter its main interface as follows. Here, please select the NTFS partition or HFS+ partition of external hard drive, and click 'Delete Partition' feature from the left action pane. If there are multiple partitions on the external disk, please select the disk and click 'Delete All Partitions' feature instead. After that, an unallocated space will be released.

Secondly, you can create one or more FAT32 partitions in unallocated space. Select the unallocated space and choose 'Create Partition' feature from the left side.

Then, you should choose 'FAT32' from the 'File System' option in the pop-out window. Meanwhile, you can set properties for this new partition and click 'OK' to go back to the main window of Partition Wizard.

At last, click 'Apply' button to make all changes performed.

Solution 2: Format External Hard Drive Windows 7/8/10 to exFAT

Firstly, please delete the NTFS or HFS+ partition in either MiniTool Partition Wizard or Windows Disk Management to release unallocated space. Then, you can create an exFAT partition with MiniTool Partition Wizard Free Edition by following steps introduced in the section Step 2: Create exFAT Partition with MiniTool Partition Wizard.

Once a FAT32 or exFAT partition is created on your external hard drive, you can share it on both Mac and Windows PC.

Solution 3: Create One HFS+ Partition for Mac and One NTFS Partition for Windows

Alternatively, you can create 2 partitions on the external hard drive: one is for Mac, and the other is for Windows. As to size for each partition, it depends on your own demands. By this way, you can easily format an external hard drive for Mac and Windows.

Step 1: Create a NTFS Partition and a FAT32 Partition

Please run MiniTool Partition Wizard Free Edition, then delete all the original NTFS or HFS+ partition(s), and create a new NTFS partition as well as a FAT32 partition, and the latter will be formatted to HFS+ in Mac machine.

Then, select the external hard drive and choose 'Delete All Partitions' to create an unallocated space.

Here, select the unallocated space and choose 'Create Partition' feature from the left action pane.

Now, please specify partition label (Windows is recommended), partition type (primary or logical), drive letter, file system (NTFS), cluster size, and partition size (you can change the length of the handle to adjust partition size). Then, click 'OK' to continue.

Now, you can see a NTFS partition is created. Please use the same way to create a FAT32 partition labeled with Mac. At last, click 'Apply' button to make all changes performed.

Step 2: Format the FAT32 Partition to HFS+ Partition on Mac

Please go to Utilities → Disk Utility.

Then, select the external hard drive and click 'Partition' tab on the top.

Now, find the FAT32 partition and format it to OS X Extended (Journaled), which is the desired HFS+. Finally, click 'Apply' button to make all changes performed.

After NTFS partition and HFS+ partition are created on your external hard drive, it can be shared between Mac and Windows PC.

Bottom Line

Are you planning to format an external hard drive for Mac and PC? If yes, now try one of our methods to make external hard drive compatible with Mac and PC.

Should you have any problem, just feel free to leave us a message in comment part below or send an email to [email protected].

Format Hard Drive for Mac and PC FAQ

FAT or File Allocation Table 32 is the format using, in which Windows stores data on the hard disk drive. It makes file tracking convenient. It can track files that are fragmented into various areas on the hard disk. FAT32 is an improvement over original FAT and uses bits to locate clusters stored on the disk. It supports up to 2 TB of hard disk storage. To format the storage area you can use FAT32 formatter. Such FAT32 formatter download is available on the web and reading the best six downloads can help you take an informed decision in selecting the right one.

Ridgecrop-Fat32 Formatter

Fat32 Formatter is provided by Ridgecrop Consultant Limited and is a Window application with a graphical user interface. This FAT32 formatter download is easy and simple. You can also use WD FAT32 formatter for formatting more than 32GB disk area.

Mac Os Format Fat32

Fat32 Formatter

Fat32 formatter is free software and it supports Windows 2000, XP, Vista and FAT32 formatter Windows 7 download is available. However, the formatting range is up to 32 GB disk space only. The software is provided by TOKIWA.

Verbatim FAT32 Tool

Verbatim Fat32 Tool offered by Verbatim can work as FAT32 formatter for hard disks, optical drives, and USB flash drives. It can also be used as wdFAT32 formatter.

Fat32 Formatter Mac App

2TWare Fat32Format 1.13

2TWare provides 2TWare FAT32 formatter for MAT 1.13. It has added support for bytes per sector values except 512. It supports up to 2 TB of bytes and is compatible with Windows Vista and higher versions. This FAT32 formatter Windows 7 download is available.

Fat32 Formatter For Sd Card

Data Recovery for Mac

Fat32 Sd Card Formatter For Mac

Data Recovery for Mac Fat32 formatter is provided by iSkysoft. The Fat formatter download is available on the provider website with a step by step guide for installation and use of the same. The downloading is simple and easy and the software supports formatting up to 2TB of disk space.

Fat32 Formatter Mac Os X Download

Sony- FAT32 Formatter for Windows

Sony Fat32 formatter is designed for Windows and the software is compatible to Windows XP and above versions. This FAT32 formatter download is available on the provider website with a step by step guide on downloading and activating the formatter. This software can be used to format Sony external hard disk also for PS1 and other devices before using the same.

Mini Aide Fat32 Formatter – Most Popular Software

MiniAide FAT32 formatter is provided by MiniAide. It is compatible with Windows version 2000 through Windows 8. The designer offers a free FAT32 formatter download for the home edition and demo trial version for the professional version.

How to Download FAT32 Formatter?

Fat32 Formatter Online

FAT32 Formatter download processes are almost identical whether it is FAT32 formatter Windows 7 download or the WD FAT32 formatter download. Select a basic disk and find out the disk with unallocated space. Right click on the same and select “new partition” and click next to move on and select the primary partition and enter maximum size. Assign a letter to the drive created. Select “Do not format this partition” and click finish. Thereafter get a copy of the FAT32 formatter and run and enter and follow the instructions displayed to complete the process.

FAT32 is the improved version of FAT or File Allocation Table used to allocate disk space in the Windows operating system. However carrying out the process manually could be time-consuming and require huge effort inputs. Instead of using FAT32 formatter could save time and effort automating the process.